Description
Cisco SFP-10G-BXD-I SFP+ Module
Specification Table
| Specification | Details |
|---|---|
| Model | Cisco SFP-10G-BXD-I |
| Module Type | SFP+ (Small Form-Factor Pluggable Plus) |
| Data Rate | 10 Gbps |
| Wavelength | 1310 nm |
| Transmission Distance | Up to 10 km over single-mode fiber (SMF) |
| Fiber Type | Single-mode fiber (SMF) |
| Connector Type | LC Duplex |
| Duplex Mode | Full Duplex |
| Operating Temperature Range | 0°C to 70°C (Standard) |
| Compatibility | Cisco switches and routers supporting SFP+ |
| Protocols Supported | Ethernet 10GBASE-LR |
| Power Consumption | Approximately 1 W |
| MSA Compliant | Yes |
Description:
The Cisco SFP-10G-BXD-I SFP+ Module is a high-performance transceiver designed for 10 Gigabit Ethernet applications, primarily used in data centers and enterprise networks. This module operates at a wavelength of 1310 nm and supports transmission distances up to 10 kilometers over single-mode fiber (SMF), making it ideal for medium-range connections between switches, routers, and other network devices. It uses an LC duplex connector and is compliant with the Small Form-Factor Pluggable Plus (SFP+) Multi-Source Agreement (MSA), ensuring broad compatibility with Cisco equipment as well as other vendors that adhere to industry standards.
With full duplex capability, the SFP-10G-BXD-I enables simultaneous bi-directional data transfer, optimizing network performance and reducing latency. Its compact hot-swappable design allows easy installation and replacement without disrupting network operations. The module supports 10GBASE-LR protocol and maintains low power consumption, typically around 1 watt, which helps reduce overall operational costs and heat generation.
Built to operate reliably in typical data center temperature ranges (0°C to 70°C), this transceiver is a dependable choice for network administrators aiming to enhance bandwidth and ensure stable, high-speed connectivity. Overall, the Cisco SFP-10G-BXD-I module offers a reliable, scalable solution for expanding 10 Gigabit Ethernet infrastructure.
Key Features
- Type: SFP+ (Small Form-Factor Pluggable Plus) transceiver module
- Data Rate: Supports 10 Gigabit Ethernet (10Gbps)
- Wavelength: 1270 nm (TX) / 1330 nm (RX) BiDi (Bidirectional) transmission
- Reach: Up to 10 kilometers over single-mode fiber (SMF)
- Interface: LC duplex connector (single fiber, bidirectional)
- Compatibility: Compatible with Cisco 10G switches and routers supporting SFP+ ports
- Low Power Consumption: Typically less than 1W per module
- Hot-swappable: Supports plug-and-play for easy replacement or upgrades
- Diagnostic Monitoring: Supports Digital Optical Monitoring (DOM) for real-time monitoring of module parameters such as temperature, voltage, and optical power
Where it Can Be Used?
- Data Centers: Ideal for high-speed data links between switches or servers in large data centers
- Enterprise Networks: Connecting switches and routers within enterprise LANs requiring 10Gbps bandwidth
- Service Providers: For long-reach connections in metro or WAN networks using single-mode fiber
- Storage Area Networks (SANs): High-speed connectivity for SAN environments needing fast data transfer
- Campus Networks: High-bandwidth uplinks between buildings or network closets
- Fiber-Optic Networks: Where fiber infrastructure exists and long-distance 10G connectivity is required
Installation Steps
- Power Off: For safety, it’s recommended to power off the switch/router port before installation, though the module supports hot-swapping.
- Prepare Fiber Cable: Ensure you have a single-mode fiber cable with an LC connector, correctly cleaned to avoid contamination.
- Insert Module: Gently insert the Cisco SFP-10G-BXD-I module into the SFP+ port until it clicks into place.
- Connect Fiber: Connect the fiber cable to the module, ensuring the transmit (TX) and receive (RX) fibers are correctly oriented per module labeling.
- Power On: Power on the device (if powered off) or wait for the device to recognize the hot-swapped module.
- Verify Link: Check the switch/router interface status and verify the link is up, typically via LED indicators or management interface.
- Monitor: Use Digital Optical Monitoring (DOM) tools if available for performance metrics and troubleshooting.
Buy Cisco SFP-10G-BXD-I SFP+ Module at the Best Price from Datacom BD Online
In Bangladesh, you can get Cisco SFP-10G-BXD-I SFP+ Module From Datacom. We have a large collection of latest Cisco SFP Module to purchase. Order Online Or Visit our Office to get yours at lowest price. The Cisco SFP-10G-BXD-I SFP+ Transceiver comes with 1 Year warranty.
Get in Touch with Datacom Technologies (BD)
- 📞 Call/WhatsApp: 01748173213
- ✉ Email: sales@datacomtechbd.com | datacomtechnologiesbd@gmail.com
What is the price of Cisco SFP-10G-BXD-I SFP+ Module in Bangladesh?
The estimated price of Cisco SFP-10G-BXD-I SFP+ Module in Bangladesh is 18,500৳. You can buy the Cisco SFP-10G-BXD-I SFP+ Transceiver at best price from our website or visit our Office.
For the most accurate pricing, stock availability, and warranty details, we recommend contacting us before placing your order.
Reviews
Clear filtersThere are no reviews yet.