Description
Cisco GLC-BX-D Transceiver Modules
The Cisco GLC-BX-D Transceiver Modules, available at Datacom Technologies BD, offers reliable gigabit Ethernet connectivity with up to 10 km transmission over single-mode fiber. Designed for full duplex operation and compatible with Cisco switches and routers, it ensures high-performance network communication. Trust Datacom Technologies BD for genuine, high-quality Cisco networking solutions at the best prices in Bangladesh.
Specification Table
| Specification | Details |
|---|---|
| Model | Cisco GLC-BX-D |
| Type | SFP (Small Form-Factor Pluggable) Module |
| Interface | 1000BASE-BX (Gigabit Ethernet) |
| Wavelength | 1490 nm (transmit) / 1310 nm (receive) |
| Data Rate | 1 Gbps (Gigabit Ethernet) |
| Connector Type | LC Duplex |
| Distance Supported | Up to 10 km over single-mode fiber (SMF) |
| Operating Temperature | 0°C to 70°C (32°F to 158°F) |
| Power Consumption | Approximately 0.7 W |
| Duplex Mode | Full duplex |
| Compatible With | Cisco switches and routers with SFP ports |
| Standards Compliance | IEEE 802.3ah 1000BASE-BX10 |
Description:
The Cisco GLC-BX-D Transceiver Module is a high-performance, compact SFP transceiver designed to deliver reliable Gigabit Ethernet connectivity over single-mode fiber optic cables. Operating at a wavelength of 1490 nm for transmission and 1310 nm for reception, this module supports data rates up to 1 Gbps and is ideal for long-distance fiber connections, reaching distances up to 10 kilometers.
This transceiver is commonly used in telecom and enterprise networks where efficient and stable fiber optic communication is essential. It uses the 1000BASE-BX standard, which enables bidirectional communication on a single strand of fiber by utilizing different wavelengths for transmitting and receiving signals. The GLC-BX-D module’s compact SFP form factor allows easy installation and hot-swappable capability on compatible Cisco network devices.
With its low power consumption and robust design, the GLC-BX-D ensures network uptime and efficient data transmission, making it a trusted choice for network engineers aiming to extend Gigabit Ethernet networks over long distances without compromising performance or reliability. It complies fully with industry standards ensuring broad compatibility across Cisco switches and routers.
Key Features
- Type: Single-mode fiber (SMF) SFP transceiver module
- Data Rate: Supports 1 Gbps (Gigabit Ethernet)
- Wavelength: 1310 nm (transmit), 1490 nm (receive)
- Reach: Up to 10 km (6.2 miles) over SMF
- Interface: LC duplex connector
- Hot-swappable: Yes, easy to install without powering down the device
- Compatibility: Compatible with a wide range of Cisco switches, routers, and other networking devices
- Low Power Consumption: Approximately 0.8W
- Diagnostic Capability: Supports Digital Optical Monitoring (DOM) for real-time module performance monitoring
Where it Can Be Used?
- Enterprise Networks: To connect different network segments over fiber optic cables for high-speed data transfer
- Data Centers: For uplink connections between switches or from switches to routers
- Metropolitan Area Networks (MANs): Suitable for connecting devices within cities or campuses requiring fiber optic infrastructure
- Telecommunication Networks: Used by service providers for long-distance and reliable fiber connectivity
- Fiber-to-the-Home (FTTH): For last-mile connectivity in fiber optic broadband deployments
Installation Steps
- Power off the Device (Optional): Usually, the transceiver is hot-swappable; powering down is not required but recommended for safety.
- Remove the Dust Plug: Take off the dust cover from the transceiver port on the device and from the transceiver itself.
- Insert the Module: Align the transceiver with the slot and gently slide it into the SFP port until it clicks into place.
- Connect the Fiber Cable: Plug in the fiber optic cable with LC connectors matching the transmit and receive ports on the transceiver.
- Verify the Connection: Check LEDs or software diagnostics to confirm the module is properly detected and functioning.
- Enable/Configure Port: Configure the network interface as needed via the device CLI or GUI.
Buy Cisco GLC-BX-D Transceiver Modules from Datacom BD
In Bangladesh, you can get Cisco GLC-BX-D Transceiver Modules From Datacom. We have a large collection of latest Cisco SFP Module to purchase. Order Online Or Visit our Office to get yours at lowest price. The Cisco GLC-BX-D Transceiver Module comes with 1 Year warranty.
Get in Touch with Datacom Technologies (BD)
- 📞 Call/WhatsApp: 01748173213
- ✉ Email: sales@datacomtechbd.com | datacomtechnologiesbd@gmail.com
What is the price of Cisco GLC-BX-D Transceiver Modules in Bangladesh?
The estimated price of Cisco GLC-BX-D Transceiver Modules in Bangladesh is 13,500৳. You can buy the Cisco GLC-BX-D Transceiver Module at best price from our website or visit our Office.
For the most accurate pricing, stock availability, and warranty details, we recommend contacting us before placing your order.
Reviews
Clear filtersThere are no reviews yet.